hot press
英 [hɒt pres]
美 [hɑːt pres]
热压机
双语例句
- Hot press moulding technique, which was used to shape small and medium size and complicated structure ceramic, is a favorable method.
热压铸工艺是一种成形中、小尺寸的结构复杂的陶瓷产品的良好方法。 - Effect of SiC Content and Hot Press Sintering Temperature on Thermal Conductivity Property of AlN-SiC Composites
SiC含量和热压烧结温度对AlN-SiC复相陶瓷材料导热性能的影响 - Photocell control device, hot press printer, printer, feeder, and belt conveyer.
光电控制装置、热压印装置、打印机、振动送料机、产品输出皮带机等。 - When hot press molding, the moisture percentage of the wooden slice is14% to20%, and the temperature of the die is110 DEG C to130 DEG C.
上层木薄片和下层木薄片在其贴合面上胶后经模具热压成型，热压成型时木薄片的含水率为14%―20%，模具温度为110℃―130℃。 - This article introduces products of Delta PLC in the use of rubber on the hot press.
本文介绍台达小型高性能紧凑型PLC在橡胶热压机上的运用。 - Finite element method for temperature fields dynamic distribution in large scale hot press sintering furnace
大尺寸热压烧结炉温度场动态分布的有限元法研究 - Finite element analysis and structural optimization design of stander of frame patterned hot press
框式热压机机架有限元分析及结构优化设计 - In this paper, the preparation process of thermosetting resin composite materials from ramie noil fiber, hot press felt and non woven fabrics were introduced.
本文介绍了落麻纤维、落麻热压毡、落麻无纺毡制备热固性树脂复合材料的工艺过程； - Study on the Static and Dynamic Characteristic of Hot Press Closed-loop Position Control System
热压机闭环位置控制系统的静动态特性分析 - Force Amplifier's Optimization and Mold Design of Hot Press Truing Machine for Paper-Pulp Molding Product
纸浆模塑制品热压整形设备的增力机构优化及模具设计 - The other main products are all kinds of wood-based panel hot press plywood, particleboard, MDF and other pressing needs of plywood manufacturing equipment.
另一主打产品人造板热压机是各种胶合板、刨花板、中纤板以及其他需要热压胶合工艺的主要设备。 - Effect of GF/ PET friction spun core yarn structure on the impregnating degree of its composite by hot press molding
玻璃纤维/聚酯纤维摩擦纺包芯纱结构对其热压复合材料浸渍效果的影响 - Design of a New Type of Cylinder of Simultaneous Closing Device of a Hot Press
热压机同时闭合装置的新型油缸设计装卸机械计箱装卸费 - The problems which are affected by cold press rolling and hot press rolling and the resolving method, which is a.
文章对这些研究成果进行介绍，主要内容为滚压成形方法、冷和热挤滚压成形时出现的问题及解决措施。 - Resistivity and B value of these materials can be increased through hot press sintering.
热压烧结能够提高材料的电阻率及B值。 - The rod is made of the particulates by vacuum hot press and thermal extrusion.
采用真空热压技术和热挤压技术，将颗粒制成了试验棒材，测试了材料的力学性能。 - By using the system, pressing time could be automatically changed with the temperature of hot press platen.
这个系统能随着热压板温度的变化自动调整保压时间。 - The operation conditions of corrugated paper production from cornstalk by the hot press method were experimentally studied.
以玉米秸秆为对象，研究了热压制作瓦楞芯纸的工艺条件。 - TiC/ ( Ti_3Al+ ZrO_2) composites were prepared by mechanical alloying and hot press sintering.
采用机械合金化和热压烧结制备了TiC/（Ti3Al+ZrO2）复合材料。 - The paper studies the comprehensive technical measures to prolong the life of the hot press roll forging die.
本文介绍了提高辊锻热成形模寿命的综合技术措施。 - This paper focus on principles of rolling plasticity forming and factors which are affected by cold press rolling and hot press rolling and anticipates to recognize the inherent law of rolling plasticity forming.
主要对滚压成形原理、冷挤及热挤成形时的影响因素进行了分析与研究，期望能对认识滚压成形技术的内在规律有所帮助。 - Ag-Cu-MoS_2 brush materials with a graded structure was produced by hot press process in protective atmosphere.
在气氛保护下采用热压工艺制备了具有梯度结构的Ag-Cu-MoS2电刷材料，对该材料的制备工艺、显微结构、电性能和摩擦磨损性能等进行了分析。 - In the designing of the simultaneous closing device of hot press model BY, the design methods and structure options of hydraulic cylinder compensator were discussed, and the value of compensation was calculated.
本文结合BY型压机同时闭合装置的设计，论述了油缸补偿器的设计方法和结构方案，进行了同时闭合时的补偿量的计算。 - The possibility of pretreatment of refractory gold ores by alkaline ( Lime) hot press oxidation was analyzed by thermodynamics and the dynamic analysis of mechanism in its process was presented.
从热力学角度分析了碱性（石灰）热压氧化预处理难浸金矿的可能性，并对其过程机理进行了动力学分析。 - Theoretical analysis on hot pressing sintering process was carried out and the expression of hot press densification velocity was got.
对热压烧结过程进行了理论分析，得出了热压烧结致密化速率的表达式。 - The Research into Heating Facility in Hot press Machine Tool
热压机床加热系统的研究 - Causes of hot press fire are concretely analysed and many effective prevention measures given herein.
针对企业在热压机防火方面的薄弱环节，具体分析了着火原因，从多方面提出了防范措施。 - The effects of temperatures and ON/ OFF on properties of Fe sintered were studied by pulse electric current ( PEC) heating, and to compare with that sintered by hot press of radiation heating under same conditions of temperature, pressure and holding time.
研究了脉冲电流烧结过程中温度和脉冲比对Fe烧结体性能的影响，并与相同温度、压力和保温时间下辐射加热热压烧结的Fe烧结体进行了比较。